General Description

Polyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal. This is a two component product that requires 1 part of the proper "A" component mixed with 1 part of part "B" catalyst. The components are already pre-measured to the proper mix ratio. No measuring required. Do not mix partial kits.

Features

• Highly cross-linked film for toughness and durability
• Resists many chemicals and solvents
• Suitable for immersion
• Medium build epoxy

Recommended For

Corotech® V400 Polyamide Epoxy is a multi-use epoxy designed for coating items including tanks, machinery, floors, structural members, walls and other
industrial and commercial substrates requiring a durable and resistant finish. The base component dictates the colour of the mixed kit, while the converter determines the gloss and film build level.

Limitations

• This product will not cure at surface temperatures below 7.2°C (45°F)
• Do not paint if surface temperature is within 5 degrees of the dew point or if rain is expected within 12 hours.
• This product will amber and chalk if exposed to sunlight.