General Description

Epoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack. This is a two-component product that requires 1 part of the proper "A"
component mixed with 1 part of part "B" catalyst. The components are already premeasured to the proper mix ratio. No measuring required. Do not mix partial kits.

Features

• High solids (79%) and high build – excellent for corners, crevices, welds and as a concrete filler.
• Surface-tolerant mastic for marginal substrates
• Excellent for secondary containment
• Hard scratch- and impact-resistant coating

Recommended For

Ferrous Metal, Galvanized, Aluminum, concrete, Aged Coatings. Intended for use on hand prepared rusty ferrous metal, abrasive blast cleaned and hydro-blasted ferrous metal, blasted concrete, and over a wide range of intact aged coatings. Use in industrial maintenance, coastal structures, pulp and paper plants, food and beverage plants, structural steel, tank exteriors, bridges, offshore, marine and immersion in fresh or salt water.

Limitations

• This product will not cure at surface temperatures below 7.2°C (45°F)
• Do not paint if surface temperature is within 5 degrees of the dew point or if rain is expected within 12 hours.