General Description

Acrylic Epoxy is a two-component epoxy that offers unique features such as application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures. Not recommended as a heavy-duty floor finish. This is a two-component product that requires 4 parts of the proper "A" component mixed with 1 part of part "B" catalyst. The components are already premeasured to the proper mix ratio. No measuring required. Do not mix partial kits.

Features

• Waterborne acrylic epoxy
• Durability of a traditional epoxy with water clean-up
• Minimal surface prep
• Scrubbable, abrasion resistant coating
• Easy application and clean-up

Recommended For

Properly Prepared and/or Primed Steel, Iron, Concrete, Non-Ferrous Metals, & Drywall. Designed for use over a wide range of intact aged coatings. Use in mild industrial and institutional maintenance applications, coastal structures, food and beverage plants, offshore atmospheric service, walls, equipment, structural steel and light chemical duty.

Limitations

• Do not apply if material, substrate or ambient temperature is below 10°C (50°F). Relative humidity should be below 90%.
• Not designed for immersion service or as a heavy-duty floor finish.
• Will not cure at surface temperatures below 10°C (50°F).